BCA-registered tiles supplier since 2005 · Singapore & Brunei
Tactile & Nosing

Tactile and Step Nosing Tiles: A Contractor's Checklist for LUP & NRP Works

16 Nov 2026 · Forte 18 Pte Ltd

Photo: tactile paving at an MRT station in Singapore by ProjectManhattan, Wikimedia Commons, CC0 (public domain dedication).

Tactile and step nosing tiles are a small part of the bill of quantities, but when they're wrong they get flagged at inspection and torn out. On LUP and NRP works, where new landings, ramps and linkways tie into existing blocks, this is the checklist we go through with contractors.

Know the two tactile types

Contrast matters as much as texture

Tactiles and nosings need to stand out visually from the surrounding floor, not just by feel. Yellow on grey or black on a light floor works. Grey on grey doesn't. We stock yellow, grey and black tactiles, and black, yellow, light grey and speckled nosings, so you can pick for contrast against the actual floor finish.

Checklist before you order

  1. Confirm the requirement in BCA's Code on Accessibility in the Built Environment (current edition) and the project specification.
  2. Count landings, ramps and kerb crossings from the drawings, not from a site walk alone.
  3. Check that the tactile tile thickness suits the adjoining floor tile so there is no trip edge.
  4. Choose the nosing colour against the stair finish for contrast.
  5. Order spares from the same batch for future R&R replacements.
Send us your drawings. We'll mark up where warning, directional and nosing tiles go and quote the quantities. We can also prepare a 3D drawing so the town council can see the layout before work starts.

Need help choosing? Send us your area and requirements and we'll recommend tiles and quantities.

WhatsApp us Browse products

WhatsApp us